Monday, June 26, 2017

Building Suit for SDCC: Waistcoat

In planning this costume out, I thought that the smallest piece of the suit --- the waistcoat --- would be the most straightforward to sew first. After all, I've made myself several different waistcoats and they all follow the same patterning. It was just a matter of tailoring it to my measurements.

For this character, I needed to make a waistcoat with lapels. I decided to use a pattern I've used before, except I had made the versions without lapels.


Previously, I had already copied the main pattern pieces out to brown butcher paper and needed to copy the patterns for the lapels and collar.


I decided to make a mockup so I could better understand the collar and lapel structure. I played around with different lapel sizes to find a size preference.

In the course of following the pattern instructions, I realized that the pockets in the front of the pattern were FAKE! I was severely disappointed by this fact and decided to turn the faux-pockets into real welt pockets.

Once the fashion shell of the front half of the jacket was completed, I cut out a suitable pocket lining and drew the welt lines on it. Basted down the welt flap to the fashion shell.

Added a suitable pocket lining and redrew the lines. 

Sewed along the drawn lines and then CUT in between.

Pushed everything through hole I cut and then sewed the edges of the welt along the side. I was left with a 3.5" deep pocket. (On the inside, I sewed the edges and bottoms of my pocket fabric)


If you want to learn how to make a welt pocket, check out this tutorial. Mine is slightly different, but the concepts are the same.

Here's the final waistcoat. I still have to add buttons for it, but I want the buttons on the jacket and waistcoat to match so I'm going to wait until the jacket is also completed so I can just do a production run of buttons.


For a complete list of elements for this outfit:

No comments:

Post a Comment